Melting Furnace

Product Details:

(An ISO, CE, NSIC, MSME, GEM, Trade Mark, IEC Certified Company)

Maximum temperature: up to 1200˚C

Working Temp. Range: up to 1100ºC.

Temp. Accuracy: ± 1ºC.

Light weight with ceramic Fibre wool insulation (instead of Brick insulation). The outer casing is made of double walled thick P.C.R.C. sheet, finished with attractive powder coating.

Elements are made of KANTHAL “A-1” wire in coil form placed in the ribs of the tiles to have a free radiating heating. Backed by Zirconia cerewool insulation, which avoids loss of energy, this arrangement also assures the most uniform distribution of heat.

The weight & size of furnace is of one quarter and 30% respectively as compare to Bricks Furnace. A viewing cap is also provided on the door.

Temperature of the furnace is controlled by microprocessor based Programmable controller (1x14 segment, dwell, hold, ramp, timer all with Also provide calibration report of controller by NRL lab if requirement by costumer, with soft touch keypad and dual display of process & set temperature. The overshoot & undershoot of temp. Variation is drastically reduced compared to normal ON / OFF type-controlled furnace.

K type Sensor

To work on 415 Volts A. C. Three Phase Supply,

25 to 30 Ampere each Phase Approx., 12 to 15 kilo watt load Approx. 
INNER MUFFLE SIZE:

W         x       H          x     D

600mm x      600mm   x     600mm

(24”x 24”x24”) Inch

Product Details:

(An ISO, CE, NSIC, MSME, GEM, Trade Mark, IEC Certified Company)

 TECHNICAL SPECIFICATIONS:Maximum Temp.: 1400º C Working Temp: 1300ºC                                                         Temp. Accuracy: ±1ºC                                                            Heating Elements: Silicon Carbide, with end connection easily replaceable.Inner Chamber: Ceramic Board with base plate of Silicon Carbide, with heating elements placed on the top.Insulation: Ceramic Fibre of Zirconia grade Construction: Triple walled with air insulation on the outer side For Minimal Skin Temp.Body: Made of mild steel duly Powder Coated Door: Hinged type insulated with ceramic fibre and has a viewing cap.Power Control: (Phase Angle Thyristor) Temp. Control: Microprocessor based PID Programmable     controller with 1 prog x 16 segments (ramp / soak). Dual display of Set & Actual Temp. with soft touch keys. With Thermocouple break protections & Cold junction compensation.  CE mark to Meet EMC regulations.                                                                            Sensor: Pt / Pt – Rh 13%   /R Type Sensor          Safety: Over current and Short Circuit Protection Thermocouple break alarm. High Temp. alarm

Power Supply: 415 Volts A. C. Three Phase Supply,

15 to 20 Ampere each Phase Approx., 8 to 10 kilo watt load        Approx.
INNER MUFFLE SIZE:

W         x       H          x     D

450mm x      450mm   x     450mm

 (18”x 18”x18”) Inch

Additional Information:

• Production Capacity: 10

Product Details:

 Maximum Temp.: 1800ºC

Working Temp.:   1700ºC

Temp. Accuracy:    ± 0.5% of FS

Heating Elements: Molybdenum discilicide (MoSi2) heating elements, easily replaceable.

Inner Chamber:    Ceramic Brick / Board, with heating elements placed on the side walls.
Insulation:  Ultra high purity alumina low thermal mass insulation.                                
Construction:  Triple walled with air insulation on the outer side For Minimal Skin Temp.                                         
Body:    Made of mild steel duly Powder Coated.                
Door: Parallel action hinged type insulated with ceramic brick / board and has a viewing cap.                                 
Power Control:     SCR unit (Phase Angle Thyristor) with current limit and soft start facility and Step-Down Air-Cooled Transformer.   
Temp. Control: Microprocessor based PID Programmable Temp. Controller. Dual display of Set & Actual Temp. with soft touch keys. With Thermocouple break Protection & Cold junction compensation. CE mark to meet EMC regulations.                                              
Sensor:  Pt / Pt – Rh                                                                                                              
Control Panel   :      Separate Control Panel with all Electrical Accessories .                                                           
Power Supply:       415 Volts, 2/3 phase AC supply.
INNER MUFFLE SIZE

(6”x 6”x12”) Inch

Additional Information:

• Production Capacity: 2 kg

Product Details:

(An ISO, CE, NSIC, MSME, GEM, Trade Mark, IEC Certified Company)Maximum temperature: up to 1200˚C

Working Temp. Range: up to 1100ºC.

Temp. Accuracy: ± 1ºC.

Light weight with ceramic Fibre wool insulation (instead of Brick insulation). The outer casing is made of double walled thick P.C.R.C. sheet, finished with attractive powder coating.

Elements are made of KANTHAL “A-1” wire in coil form placed in the ribs of the tiles to have a free radiating heating. Backed by Zirconia cerewool insulation, which avoids loss of energy, this arrangement also assures the most uniform distribution of heat.

The weight & size of furnace is of one quarter and 30% respectively as compare to Bricks Furnace. A viewing cap is also provided on the door.

Temperature of the furnace is controlled by microprocessor based Programmable controller (1x14 segment, dwell, hold, ramp, timer all with Also provide calibration report of controller by NRL lab if requirement by costumer, with soft touch keypad and dual display of process & set temperature. The overshoot & undershoot of temp. Variation is drastically reduced compared to normal ON / OFF type-controlled furnace.

K type Sensor

To work on 415 Volts A. C. Three Phase Supply,

25 to 30 Ampere each Phase Approx., 12 to 15 kilo watt load Approx. 

 INNER MUFFLE SIZE:

W         x       H          x     D

600mm x      600mm   x     600mm

(24”x 24”x24”) Inch

Product Details:

(An ISO, CE, NSIC, MSME, GEM, Trade Mark, IEC Certified Company)TECHNICAL SPECIFICATIONS:Maximum Temp.: 1400º C Working Temp: 1300ºC                                                         Temp. Accuracy: ±1ºC                                                            Heating Elements: Silicon Carbide, with end connection easily replaceable.Inner Chamber: Ceramic Board with base plate of Silicon Carbide, with heating elements placed on the top.Insulation: Ceramic Fibre of Zirconia grade Construction: Triple walled with air insulation on the outer side For Minimal Skin Temp.Body: Made of mild steel duly Powder CoatedDoor: Hinged type insulated with ceramic fibre and has a viewing cap. Power Control: (Phase Angle Thyristor)         

Temp. Control: Microprocessor based PID Programmable     controller with 1 prog x 16 segments (ramp / soak). Dual display of Set & Actual Temp. with soft touch keys. With Thermocouple break protections & Cold junction compensation.  CE mark to Meet EMC regulations.                                                                               

 Sensor: Pt / Pt – Rh 13%   /R Type Sensor                                                    

 Safety: Over current and Short Circuit Protection Thermocouple break alarm. High Temp. alarm

Power Supply: 415 Volts A. C. Three Phase Supply,

15 to 20 Ampere each Phase Approx., 8 to 10 kilo watt load        Approx.
INNER MUFFLE SIZE:

W         x       H          x     D
450mm x      450mm   x     450mm

 (18”x 18”x18”) Inch

Additional Information:

• Delivery Time: 2 to 3m weeks